Accessories

LGA1700 Compatible

The Freezer i35 is already compatible with Intel's Alder Lake LGA 1700 processors. Even though the socket has increased in size compared to its predecessor, the hotspot remains centred in the area of the CPU die. The Direct Touch heat pipes of the Freezer i35 cover this area completely.

Compact Performance Meets Modern Design

Optimised performance meets modern, black design and whisper-quiet operation. With its four offset heat pipes, the single-tower CPU cooler enables fast heat transfer into the heat sink, where it can be efficiently dissipated by means of a 120 mm fan.

Ultimate Performance Thermal Paste

The Freezer i35 comes with a 0.8 g syringe of the new MX-5. ARCTIC's Ultimate Performance thermal paste enables a particularly thin layer thickness due to its low viscosity and particle size and significantly reduces the heat build-up between the heat spreader of the CPU and the cooler. At the same time, it is neither conductive nor capacitive and therefore absolutely safe to use, even for beginners.

Fan Optimised for Heat Sinks

The fan installed in the Freezer i35 benefits from all the advantages of the P-fans. With their low-vibration, power-saving motor and hydrodynamic plain bearing, they combine quiet and efficient operation. Despite its high fin density, the fan guarantees a high static pressure with its focussed air flow and is therefore ideal for use on radiators and heat sinks. The speed of the fan can be dynamically controlled via PWM and can thus be optimally adapted to any scenario.

Easy Installation and Unlimited RAM Clearance

The Freezer i35 is a socket-specific installation variant for Intel Socket LGA 1700, 1200 and 115x. This reduces unnecessary mounting material and additionally simplifies the installation. ARCTIC uses an improved and simplified mounting system with spring-loaded screws for the Freezer i35. This achieves optimum contact pressure and even distribution of the thermal compound. Due to its compact design, it allows unrestricted RAM compatibility when installed.

Quality You Can Rely On

To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality, but also in terms of durability. This is a certainty that we are happy to pass on to our customers, which is why we give a six years manufacturer's guarantee on the Freezer i35 A-RGB.

Highest Thermal Conductivity

The surfaces of processor chips and cooler floors are covered with microscopic dents; ARCTIC's MX-4 thermal paste is composed of carbon microparticles which fill these cavities. This leads to extremely high thermal conductivity, guaranteeing that heat is dissipated quickly and efficiently from the CPU or GPU. With its outstanding performance, the MX-4 is not only an excellent choice for overclockers and enthusiasts, but also for other sapplications that require thermal transmission. MX-4 proves without a doubt that great performance does not necessarily require a high price.

Easy Application

Thanks to its consistency, MX-4 is easy to apply, even for beginners. The video below demonstrates different application techniques to avoid air pockets between processors and coolers.

Secure Usage

In contrast to pastes based on metal oxides or liquid metal, ARCTIC's MX-4 is metal-free and not electrically conductive. This eliminates the risk of short circuiting, and eliminates the need to worry about corrosion damage to the radiator floor caused by liquid metal.

Available in Various Sizes

ARCTIC MX-4 is available in sizes ranging from 2 to 45 grams. Resealable packaging prevents the paste from drying out.

Long-lasting Durability

Compared to metal or silicone thermal pastes, you don't have to make any compromises with the MX-4: once applied, it lasts up to 8 years.

Proven quality

While the packaging of our thermal paste has changed several times over the years, the composition of the formula has remained the same. Our MX pastes have long stood for high performance and quality, and with our new, recyclable packaging, we aim to reduce CO₂ emissions and thus make a contribution to the environment.

High-Class Finish with Aluminium Top Plate

With its push-pull configuration, the Freezer 36 not only impresses with its efficient cooling performance, but also with its design. The soldered ends of the heatpipes are concealed by the screwed aluminium cover, allowing it to blend seamlessly into any PC setup and highlight both performance and appearance.

Freezer 36 - Tested and Confirmed by Intel

Intel has tested and confirmed the Freezer 36 on the i9-13900K/KF, i9-14900K/KF and i9-13900KS in the Enthusiast and Desktop category. In these tests, Intel considered both the mounting with contact frame and the cooler's performance.

Future-Proof Compatibility

The Freezer 36 is multi-compatible with Intel and AMD sockets. Intel will release the new Arrow Lake processors on the LGA1851 socket in the future. We guarantee full compatibility. All Freezer 36 can be used with the new LGA1851 socket from Intel without limitation.

Improved Fan Mounting

Thanks to the innovative mounting system, booth fans are effortlessly mounted in the heatsink using a click system. This mounting method eliminates the need for fan clips, making it easier to install the cooler or replace the fans, even if the cooler is already installed. The Freezer 36 is therefore compatible with most 120 mm fans.

LGA1851 | LGA1700 Contact Frame

Intel's Independent Loading Mechanism (ILM) deforms the CPU by pressing it into the socket at two points with over 40 kg. This causes pressure in the PCB, the DIE and the solder layer between the DIE and IHS (Integrated Heat Spreader). With high thermal load, this can lead to long-term problems. The mounting frame from ARCTIC does not deform the CPU, reduces the mechanical load on the CPU massively, is quick and easy to install and allows the cooler to be screwed onto the CPU's backplate. As a result, mechanical stress on the mainboard and CPU is minimised, cooling performance remains consistent and installation is quick and uncomplicated.

High-Quality Bearing

Thanks to a combination of alloy and lubricant developed in Germany, friction within the bearing is minimised and greater efficiency is achieved. In addition to preventing lubricant loss, wear on the pin and sleeve is also minimised. In this way, less heat is generated, less bearing noise is produced and the service life of the fan is significantly extended.

Optimised Heatsink

The fins of the heatsink are open at the side and allow the pull fan to draw additional cool air out of the pc case through the heatsink. This side-flow design achieves even more efficient ventilation.

P-Fans with High Static Pressure

ARCTIC relies on the proven P fans, which are known for their powerful performance. The P series is particularly suitable for use on heat sinks and radiators. Due to the dense fin structure of heat sinks, the fans used achieve significantly better performance than fans designed for airflow thanks to their high static pressure.

Large Selection of Variants

The Freezer 36 is available in five different versions, all equipped with two fans in a push-pull configuration. In addition to the standard model with aluminium heatsink design, a version with a black heatsink is also available. For continuous operation, there is also the CO version, which is equipped with fans with double ball bearings. Alternatively, users can choose between a black and a white version with A-RGB fans.

Optimised Packaging Saves Resources

A sustainable use of resources is really important for us at ARCTIC Thus we updated the packaging of the MX-4 to minimize it's CO₂ Footprint.

The practical, recyclable packaging bag of our thermal compound helps us to reduce the environmental impact of packaging materials by about 40% and thereby save resources.

Better than Liquid Metal

The ARCTIC MX-4 compound is composed of carbon micro-particles which lead to an extremely high thermal conductivity. It guarantees that heat generated from the CPU or GPU is dissipated quickly and efficiently. Superb in performance, MX-4 is the best companion for overclockers and enthusiasts.

Easy to Apply

With an ideal consistency, the MX-4 is very easy to use, even for beginners. The possibilities for its application and the most effectively way to avoid voids between CPU and cooler we show you in the video.

Safe Application

It does not contain any metallic particles so electical conductivity would not be an issue. Unlike silver and copper compound, it ensures that contact with any electrical pins would not result in damage of any sort.

High Durability

In contrast to metal and silicon thermal compound, the performance of MX-4 does not compromise over time. Once applied, you do not need to apply it a second time as it will last at least for 8 years.

Value for Money

A high performance thermal compound perfect for system builders, there's no suprise that the MX-4 exceeds your expectations for its low price tag.

High-Class Finish with Aluminium Top Plate

With its push-pull configuration, the Freezer 36 CO not only impresses with its efficient cooling performance, but also with its design. The soldered ends of the heatpipes are concealed by the screwed aluminium cover, allowing it to blend seamlessly into any PC setup and highlight both performance and appearance.

Freezer 36 - Tested and Confirmed by Intel

Intel has tested and confirmed the Freezer 36 on the i9-13900K/KF, i9-14900K/KF and i9-13900KS in the Enthusiast and Desktop category. In these tests, Intel considered both the mounting with contact frame and the cooler's performance.

Future-Proof Compatibility

The Freezer 36 CO is multi-compatible with Intel and AMD sockets. Intel will release the new Arrow Lake processors on the LGA1851 socket in the future. We guarantee full compatibility. All Freezer 36 can be used with the new LGA1851 socket from Intel without limitation.

Improved Fan Mounting

Thanks to the innovative mounting system, booth fans are effortlessly mounted in the heatsink using a click system. This mounting method eliminates the need for fan clips, making it easier to install the cooler or replace the fans, even if the cooler is already installed. The Freezer 36 CO is therefore compatible with most 120 mm fans.

LGA1851 | LGA1700 Contact Frame

Intel's Independent Loading Mechanism (ILM) deforms the CPU by pressing it into the socket at two points with over 40 kg. This causes pressure in the PCB, the DIE and the solder layer between the DIE and IHS (Integrated Heat Spreader). With high thermal load, this can lead to long-term problems. The mounting frame from ARCTIC does not deform the CPU, reduces the mechanical load on the CPU massively, is quick and easy to install and allows the cooler to be screwed onto the CPU's backplate. As a result, mechanical stress on the mainboard and CPU is minimised, cooling performance remains consistent and installation is quick and uncomplicated.

Designed for Continuous Operation

Both fans of the Freezer 36 CO are each equipped with two japanese ball bearings. This makes these fans particularly durable and resistant to external forces such as heat, dust and vibrations. This variant is therefore the ideal choice for 24/7 operation.

Optimised Heatsink

The fins of the heatsink are open at the side and allow the pull fan to draw additional cool air out of the pc case through the heatsink. This side-flow design achieves even more efficient ventilation.

P-Fans with High Static Pressure

ARCTIC relies on the proven P fans, which are known for their powerful performance. The P series is particularly suitable for use on heat sinks and radiators. Due to the dense fin structure of heat sinks, the fans used achieve significantly better performance than fans designed for airflow thanks to their high static pressure.

Large Selection of Variants

The Freezer 36 is available in five different versions, all equipped with two fans in a push-pull configuration. In addition to the standard model with aluminium heatsink design, a version with a black heatsink is also available. For continuous operation, there is also the CO version, which is equipped with fans with double ball bearings. Alternatively, users can choose between a black and a white version with A-RGB fans.