Accessories

Advantech Router Accessory Kit Learn More

B+B SmartWorx Multi-Band Swivel Antenna - Range - UHF, SHF - 2.4 GHz to 2.5 GHz, 4.9 GHz to 5.35 GHz, 5.725 GHz to 5.85 GHz - 2 dBi - Wireless Data NetworkRubber Duck Aerial - Omni-directional - SMA Connector Learn More

B+B SmartWorx 3.8/5/5 DBI Dual Band 2.4/5 Ghz Antenna, Rubber Duck RP-SMA - Range - VHF, UHF - 2.4 GHz to 2.5 GHz, 4.9 GHz to 5.8 GHz - 5.5 dBi - Wireless Data NetworkDipole - Omni-directional Learn More

Advantech ACP-2010 Server Case - Rack-mountable - 2U - 4 x Bay - 1 x 350 W - Power Supply Installed - ATX, Micro ATX Motherboard Supported - 1 x External 5.25" Bay - 1 x External 3.5" Bay - 2 x Internal 3.5" Bay Learn More

All signals entering the female DCE connectors on pin 3 (Transmit Data), pin 4 (Data Terminal Ready), and pin 7 (Request to Send) are diode OR'd together and appear as outputs on the male DTE connector. Pin 1 (Carrier Detect), pin 2 (Receive Data), pin 6 (Data Set Ready), and pin 8 (Clear to Send) are all signals entering the male DTE connector and are connected straight through as outputs on the two female DCE connectors. Signal Ground is connected straight through to all ports on pin 5.

To install the Modem Data Splitter, a straight through 9-pin to 9-pin cable can be used from the computer or terminal to the female 9-pin DCE connectors. Connect the male 9-pin DTE connector straight through to the modem. (B&B model number 9PAMF6.) If your modem uses a DB-25 female connector, use a standard 9-pin to 25-pin adapter cable. (B&B model number 232CAMS.)

Learn More