Accessories

The LANSeeker™ is a fast, rugged cable tester and tone generator in one unit. It displays cable test results using LED indicators on the main and remote unit. An easy-to-use professional grade tool, the LANSeeker is a must have for residential and commercial cable installers. When the unit senses a connection between the main and remote unit, the battery-saving auto-on feature initiates test results within 2 seconds. The tester automatically powers off within 5 seconds of the cable being disconnected. LANSeeker tests for shorts, opens, miswires, reversals, and split pairs and can display connection and fault information on a pair-by-pair basis. It also generates audio tones for use with tone tracers on all pairs.

• Displays cable test results on main and remote units in less than 2 seconds
• Immediately detects shorts by just plugging in one end of a cable to the tester
• Identifies shorts, opens, miswires, reversed and split pairs
• No on/off switch, automatically starts test when a connection is sensed between main and remote unit
• Debug mode diagnoses and displays faults one pair at a time
• Includes tone generator
• Self-stored remote
• Made in the USA

The Platinum Tools pocket-size PoE Detector detects PoE end/mid-span voltages on network cables. LED indicators instantly show "GO/NO-GO" detection on PoE networks. Plug cables directly into the builtin RJ45 jack or use the included patch card to detect voltage in wall jacks. Differentiates between end-span PoE power which is supplied from PoE switches or router and mid-span voltage from injectors. End-span detection indicate voltages are found on pairs 1/2, 3/6; mid-span detection indicates voltages found on pairs 4/5, 7/8.

• Go/No-Go PoE Voltage Detector
• End-span or Mid-span
• Bright LED indicators
• Plug direct or use included patch cord
• Pocket-size
• 802.3af or 802.3at compatible
• Detection range is between 24V-48V

Easy-to-use, pocket-sized tester for all varieties of PoE - up to 56 volts and 280 watts of power. Powered by the PoE circuit, the TPS200C requires no batteries, and can be used inline with an actual PoE device to measure current flow, or by itself in Powered Device (PD) Simulation mode to determine the maximum power available from the PoE power source.

• Measures DC voltage from 3.5 to 56 volts, and power up to 280 watts; also tests up to 4-pair PoE (IEEE 802.3bt Type 3)
• Test power inline with a PoE device or use tester in Powered Device (PD) Simulation mode to test power before attaching a powered device
• Easy-to-read, bright, scrolling OLED display
• Test PoE on active data cables without interrupting data flow
• Automatic mode and polarity detection
• Tester features dual RJ45 ports for testing PoE and dual 2.1x5.5mm DC jacks for testing DC power supplies. Includes 2.1x5.5mm DC patch cable

Works with virtually all common fiber optic sizes and connector types, allowing you to test cables prior to install and test patch & breakout cables for faults. Powerful 10mW laser makes faults easy to see. Convenient flip-cap protects the laser tip, and with included adaptor works with most common sizes and types of fiber connectors.

• Bright 10mW laser for continuity testing, also shows breaks and performance-reducing bends in most types of fiber optic cable
• Aluminum construction for lightweight and durability
• Simple slide switch to select either a flashing or solid beam
• Hinged flip cap protects the lens when not in use
• Works with both 1.25 & 2.5mm ferrules
• Runs for more than 20 hours on 2 AA batteries (included).