Accessories

This RJ45 connector is designed for larger cables and conductors. Features a unique integrated Hi-Lo stagger load bar and allows 'big' conductors to pass through the front end of the connector making it easy to verify the wiring sequence before terminating. This connector is typically used with Cat6 and is terminated with EXO™ Crimp Frame and EXO-EX Die (100061C).

• Hi-Lo stagger to isolate each conductor
• Simple one piece/pass through design, no bars or liners
• Insulation Diameter (Conductor) Size range: .039" - .044" (1.0 -1.12mm)
• Max Outer Diameter: .290" (7.36mm)
• Typically used with Cat6
• 5e/6/6A compliant
• Solid or Stranded 24-22 AWG
• RoHS 2, UL & FCC compliant
• Made in the USA

Patch panels are an efficient and convenient solution to terminating all the cable runs coming in from various rooms to one main location commonly referred to as the server room or wiring closet. Patch panels are key to connecting and routing circuits in your network and beneficial to:

• Keeping your cables tidy
• Making it easier to identify your cables
• Keep your cables secure
• Easier to re-configure your network
• Easier to troubleshoot your network

Our new rugged housing protects almost any RJ45 coupler from dust and splashes. Dual locking lugs keep the housing securely closed while dual center mounting points allow the housing to be secured with screws or cable ties. (coupler not included)

• Extend any RJ45 Cable run while protecting from the elements
• IP64 - sealed against dust and splashing water
• Cat 5e/6/6A compatible with appropriate coupler
• Full rubber liner and dual locking latches
• Center mounting points to secure to a surface

Support and secure your communication and other low voltage cables with these various sized Bridle Rings. Simple, effective and constructed of solid, low carbon steel. The perfect choice for cable management made easy!

The patented ezEX48 connectors feature a unique integrated Hi-Lo stagger load bar and allows 'big' conductors to pass through the front end of the connector making it easy to verify the wiring sequence before terminating. This connector is typically used with Cat6A (Lg. Cat6) cabling and is recommended for PoE/PoE+ and Data applications. The termination tool for these connectors is the EXO Crimp Frame and EXO-EX Die (100061C).

• Hi-Lo stagger isolates each conductor for higher performance
• Simple one piece/pass through design, no bars or liners
• Insulation Diameter (Conductor) Size range: .043" - .048" (1.09 -1.22mm)
• Max outer diameter: .290" (7.36mm)
• 50 micron gold plated contacts
• Solid or Stranded 23-22 AWG
• TIA, TAA, RoHS, UL & FCC compliant
• Typically used with Cat6A & Lg Cat6
• Made in the USA
• US Patents 9,543,729 B2; 10,116,082 B2; & 10,573,990 B2. Foreign patents.