Accessories

The Plena PLE-WP3S2Z-US Wall Panel is used to remotely select a music source and activate or deactivate zones of a Plena PLE audio mixer or mixer amplifier.

The RA-5 antenna is ideally suited for IEEE 802.11b and 802.11g wireless LAN's and Bluetooth applications and other systems operating in the 2.4 GHz ISM band. The RA-5 is a mobile or desktop Omni wireless LAN antenna with a magnetic base.

• Premium ultra-low-loss coax cable
• 50 ohm
• Robust male BNC connectors

The CXU10 is an ultra-low loss, premium-grade, 10 foot coax cable for UHF wireless microphone systems.

Its high-efficiency and low-attenuation characteristics make it ideal for system installations requiring lengthy cable runs between antennas and receivers.

The PLM-WCP PLENA matrix Wall Control Panel is an accessory of the PLM-8M8 PLENA matrix 8 channel DSP Matrix Mixer, and like any good accessory it has a complementary aesthetic design, but behind the good looks and sleek design, there is a product of substance and usability.

Installation couldn’t be easier; Powered over standard CAT 5 from the PLM-8M8, the unit’s communication is via RS485, this means that multiple PLM-WCPs can be daisy-chained together with the PLM-8CS 8 Zone Call Station, reducing cable runs and installation time.

Functions | Controls and indicators

Controls on the unit are all capacitive touch, and the LED lights are white, this gives a clean look and feel to the unit.

The select button simply toggles through each of the 4 possible selections. There are 2 configurations and during installation the DIP switch on the rear of the unit can be set to make the selection area either; A) 4 microphone/line inputs, so that each can be mixed individually in a zone, or B) 3 separate music sources that are switched, and an off.

Labeling

Labeling the unit couldn't be easier. Simply use the PC GUI software to print of the labels. This will also include white text on black background, so the aesthetics of the unit are kept.

• Active 2-in x 8-out antenna splitter
• Distributes DC to power four receivers
• Splits two antennas into four diversity receivers
• Selectable booster feed for powering active antennas and boosters
• Additional cascade output per antenna allows stacking splitters without sacrificing 2x8 function

The AASP is a professional, wide bandwidth, active antenna splitter designed to function as the distribution hub of RF and DC power in a multichannel wireless microphone system. One AASP actively splits each incoming antenna signal (A and B) into four connected diversity receivers in the system without signal loss, as well as distributing DC to power each of the four connected receivers.

In addition to the four RF outputs per antenna, AASP also includes a convenient cascade output per antenna allowing incoming signals to be sent directly to another AASP unit with zero loss, and without sacrificing any of the four RF outputs per side. A total of five AASP splitters can be cascaded from one pair of antennas.

The selectable booster feed powers active antennas and/or booster amps with 12V DC. The factory default setting is on, and should a need arise for the booster feed to be off, an on/off switch can be accessed on the main circuit board inside of the chassis.