Accessories
-
Advantech 1960047831N001 Cooling Fan/Heatsink - 2.76" Maximum Fan Diameter - 265.6 gal/min Maximum Airflow - 5400 rpm - Compatible Intel Socket: H LGA-1156, H2 LGA-1155 - Bulk - Processor
Advantech 1960047831N001 Cooling Fan/Heatsink - 2.76" Maximum Fan Diameter - 265.6 gal/min Maximum Airflow - 5400 rpm - Compatible Intel Socket: H LGA-1156, H2 LGA-1155 - Bulk - Processor Learn More -
Advantech Air Filter - For Fan Tray - 4.7" Height x 3.9" Width x 0.6" Depth
Advantech Air Filter - For Fan Tray - 4.7" Height x 3.9" Width x 0.6" Depth Learn More -
B+B SmartWorx 232AMF5 Serial Data Transfer Cable - 6 ft Serial Data Transfer Cable - First End: 1 x 25-pin DB-25 Serial - Male - Second End: 1 x 25-pin DB-25 Serial - Female - 26 AWG
B+B SmartWorx 232AMF5 Serial Data Transfer Cable - 6 ft Serial Data Transfer Cable - First End: 1 x 25-pin DB-25 Serial - Male - Second End: 1 x 25-pin DB-25 Serial - Female - 26 AWG Learn More -
B+B SmartWorx RS-232 Data Tap - 2 x 25-pin DB-25 RS-232 Serial Female - 1 x 25-pin DB-25 RS-232 Serial Male
On the Data Tap the male RS-232 connector on the top and the female RS-232 connector on the bottom are connected straight through, pin for pin. These connectors are used to connect the Data Tap in series with the RS- 232 line to be tapped. Either the Transmit Data from pin 2 or the Receive Data from pin 3 can be brought out to the Tap Connector. Pin 1, Protective Ground, and pin 7, Signal Ground, of all three connectors are interconnected.
The small switch is used to program the Tap Connector. The bottom two switches pick Receive Data (RD) or Transmit Data (TD) to be sent to the Tap Connector. (See the markings near the switch.) When the RD switch is on, only mainline Receive Data is sent to the Tap Connector. When the TD switch is on, only mainline Transmit Data is sent to the Tap Connector. When both switches are on, both the Transmit Data and the Receive Data are sent to the Tap Connector.
Learn More -
B+B SmartWorx RS-232 9-pin Line Booster - 100 ft Maximum Operating Distance
Model BB-232LB9R is a 9-pin RS-232 repeater that retransmits all 8 signals and carries the Ground line through. Many computers, laptops and desktops feature low-power versions of RS-232 ports that are unable to drive port-powered devices or full-length RS-232 cabling.
Model BB-232LB9R amplifies these weak signals up to the RS-232 Standard for uses such as running port-powered devices (see Figure 1). It is suitable for extending full- powered RS-232 cable runs beyond the typical 15 to 30 meters (50-100 ft) distance recommendation
Learn More -
B+B SmartWorx Serial RS-232 DB9 Female To TTL DB9 Male Port Powered Converter - 1 x 9-pin DB-9 RS-232 Serial Female - 1 x 9-pin DB-9 Serial Male
Model 232LPTTL converts RS-232 to 5VDC TTL/CMOS compatible levels. Model 232LPTTL33 converts RS-232 to 3.3VDC TTL/CMOS compatible levels. Two channels are used to convert from RS-232 to TTL/CMOS signals and two channels are used to convert from TTL/CMOS signals to RS-232. These converters support TD, RD, RTS, and CTS. DB9S female connector on the RS-232 side. DB9P male connector on the TTL/CMOS side. This unit is powered from the RS-232 data and handshake lines, whether the lines are high or low.
Learn More
