Accessories

The TSW-770-MSMK multisurface mount kit provides a versatile surface mounting solution for a TSW-770 or TSS-770 series touch screen. Using the multisurface mount kit, the touch screen can be mounted directly to glass, granite, marble, wood paneling, plaster, smooth masonry, or virtually any other flat surface. TSW-770-MSMK is ideal for mounting at the entrance to a meeting space for room scheduling applications, and it is compatible with the TSW-770-LB light bar to provide a clear indication of the room availability status.

The TSW-770-MSMK attaches securely to a flat, smooth surface without screws using the included peel-and-stick adhesive rear housing. For a finished appearance when mounted to a transparent glass wall, an adhesive molded plastic cap is provided, which simply affixes to the opposite side of the glass behind the unit. Templates are provided for the MSMK and the plastic cap to help ensure that both are level and properly aligned with the surface.

The TSW-770-MSMK comes complete with a self-adhering plastic raceway for use on smooth surfaces, which conceals cables running to the touch screen from the floor, ceiling, or an adjacent wall, pillar, or mullion. The raceway is paintable and is composed of three 3 ft (0.91 m) sections, as well as an assortment of elbows and couplings.

The TSW-770-MSMK rear housing provides four cutout holes (on the top, bottom, and sides of the housing) for running concealed cables to the touch screen using the included adhesive-backed raceway. A plastic cover with an opening for the raceway is attached to the rear housing to conceal any unused cutouts.

Key Features

• Permits flush mounting a TSW-770 or TSS-770 series touch screen to virtually any flat, smooth surface
• Ideal for mounting at the entrance to a meeting space for room scheduling applications
• Supports glass surface and partition mounting
• Compatible with the TSW-770-LB light bar for a clear indication of the room availability status
• Secure, screwless installation using the peel-and-stick adhesive rear housing
• Provides an assortment of raceway to conceal wiring
• Includes a rotatable plastic cover to conceal unused cutouts
• Available in smooth black or white finish

Provides a rugged, high-performance interface cable purpose-built for use with Crestron® FT2 Series FlipTop™ cable management systems. Each cable installs in the FlipTop assembly using a cable pass-through plate module, which allows the cable to be pulled out smoothly for use, and then dropped back into the FlipTop when done. Pass-through cables and plates offer an affordable alternative to cable retractors. 

TheFT2A-PLT-BLANK-10blank plates for Crestron® FlipTop™ FT2 Series Cable Management Systems cover any unused module spaces within the FlipTop assembly. The simple drop-in modular design makes the plate easy to install and matches the smooth black finish of the FipTop assembly. Each blank plate module fills and covers a single empty module space. The FT2A-PLT-BLANK-10 is sold in pack of ten.

Crestron® Pass-Through Cables (FT2A-CBL-PT Series) offer a cost-effective cable management solution for use with CrestronFT2 Series FlipTop™ cable management systems. Each cable installs in the FlipTop assembly using a cable pass-through plate module, which allows the cable to be pulled out smoothly for use, and then dropped back into the FlipTop when done. When stowed in the FlipTop, the cable simply drops beneath the table while the connector remains neatly nested in the pass-through plate.

Crestron pass-through cables feature a highly flexible, low-friction design using flat construction and durable dual-layer jacket. The connector ends are sculpted with a soft-feel boot for easy handling and uniform alignment within the FlipTop.

The following 4K pass-through cables feature a minimum TMDS bandwidth of 18 Gbps to support ultra high-definition digital video signals up to 4K60 4:4:4. Active circuitry is employed for optimal performance.

• HDMI® to HDMI - The FT2A-CBL-PT-4K-HD provides a High-Speed HDMI cable with a male HDMI Type A connector at both ends.
• DisplayPort™ to DisplayPort - The FT2A-CBL-PT-4K-DP provides a DisplayPort cable with a male DisplayPort connector at both ends.
• DisplayPort to HDMI - The FT2A-CBL-PT-4K-DP-HD provides a male DisplayPort connector at the source end and a male HDMI Type A connector at the sink end; converts DisplayPort to HDMI to allow connection of a DisplayPort source to an HDMI input.
• Mini DisplayPort to DisplayPort - The FT2A-CBL-PT-4K-MDP-DP provides a male Mini DisplayPort connector at the source end and a regular-sized male DisplayPort connector at the sink end; converts Mini DisplayPort to standard DisplayPort to allow connection of a Mini DisplayPort source to a DisplayPort input.
• Mini DisplayPort to HDMI - The FT2A-CBL-PT-4K-MDP-HD provides a male Mini DisplayPort connector at the source end and a male HDMI Type A connector at the sink end; converts Mini DisplayPort to HDMI to allow connection of a Mini DisplayPort source to an HDMI input.
• USB-C® to HDMI - The FT2A-CBL-PT-4K-USBC-HD provides a male USB Type-C® connector at the source end and a male HDMI Type A connector at the sink end; converts USB-C to HDMI to allow connection of a USB-C source to an HDMI input.

Additional pass-through cables are available to support analog AV and data signals. These cables are passive.

• VGA - The FT2A-CBL-PT-VGA provides a VGA cable with a male HD15 connector at both ends; supports resolutions up to Full HD 1080p.
• Stereo Audio - The FT2A-CBL-PT-AUD provides an unbalanced stereo audio cable with a male 3.5 mm mini-TRS connector at both ends.
• LAN - The FT2A-CBL-PT-CAT6 provides a CAT6 LAN cable with a male RJ-45 connector at both ends.
• USB 2.0 - The FT2A-CBL-PT-USB provides a USB 2.0 cable with a male USB Type-A connector to USB Type-B male connector. Note that this cable can be used to connect laptops to codecs and extenders but cannot be used to connect a laptop (PC) to another PC.

The FT2A-CBL-PT Series pass-through cables are suitable for use as a repair replacement for CrestronFT2A-CBLR-GRseries cable retractors.

The TSW-770-MSMK multisurface mount kit provides a versatile surface mounting solution for a TSW-770 or TSS-770 series touch screen. Using the multisurface mount kit, the touch screen can be mounted directly to glass, granite, marble, wood paneling, plaster, smooth masonry, or virtually any other flat surface. TSW-770-MSMK is ideal for mounting at the entrance to a meeting space for room scheduling applications, and it is compatible with the TSW-770-LB light bar to provide a clear indication of the room availability status.

The TSW-770-MSMK attaches securely to a flat, smooth surface without screws using the included peel-and-stick adhesive rear housing. For a finished appearance when mounted to a transparent glass wall, an adhesive molded plastic cap is provided, which simply affixes to the opposite side of the glass behind the unit. Templates are provided for the MSMK and the plastic cap to help ensure that both are level and properly aligned with the surface.

The TSW-770-MSMK comes complete with a self-adhering plastic raceway for use on smooth surfaces, which conceals cables running to the touch screen from the floor, ceiling, or an adjacent wall, pillar, or mullion. The raceway is paintable and is composed of three 3 ft (0.91 m) sections, as well as an assortment of elbows and couplings.

The TSW-770-MSMK rear housing provides four cutout holes (on the top, bottom, and sides of the housing) for running concealed cables to the touch screen using the included adhesive-backed raceway. A plastic cover with an opening for the raceway is attached to the rear housing to conceal any unused cutouts.

Key Features

• Permits flush mounting a TSW-770 or TSS-770 series touch screen to virtually any flat, smooth surface
• Ideal for mounting at the entrance to a meeting space for room scheduling applications
• Supports glass surface and partition mounting
• Compatible with the TSW-770-LB light bar for a clear indication of the room availability status
• Secure, screwless installation using the peel-and-stick adhesive rear housing
• Provides an assortment of raceway to conceal wiring
• Includes a rotatable plastic cover to conceal unused cutouts
• Available in smooth black or white finish