Power Injectors/Splitters
-
Hanwha Techwin SPO-6011 PoE Injector - 120 V AC, 230 V AC Input - 55 V DC, 1.10 A Output - 10/100/1000Base-T Input Port(s) - 10/100/1000Base-T Output Port(s) - 60 W - Black
$331.07Hanwha Techwin SPO-6011 PoE Injector - 120 V AC, 230 V AC Input - 55 V DC, 1.10 A Output - 10/100/1000Base-T Input Port(s) - 10/100/1000Base-T Output Port(s) - 60 W - Black Learn More -
Wisenet 83W PoE Injector - 120 V AC, 230 V AC Input - 55 V DC, 1.50 A Output - 1 x 10/100/1000Base-T, 1 x SFP Input Port(s) - 1 x 10/100/1000Base-T Output Port(s) - 83 W - Wall Mountable - Black
$385.49The SPO-8315 injects Power over data-carrying Ethernet cabling. It follows the IEEE802.3BT/IEEE802.3AT/IEEE802.3AF standards and is compatible with existing Ethernet switches and networked devices. Injector provides up to 83W HPoE/POE++, Built-in SFP slot. Compatible with XNP-9300RW / XNP-8300RW / XNP-6400RW, PNM-9085RQZ / PNM-9084RQZ / PNM-9085RQZ' / PNM-9084RQZ' / PNM-9320VQP / PNM-9321VQP / PNM-9322VQP
Learn More -
-
Bosch Midspan, 60W, Single Port, AC In - 120 V AC, 230 V AC Input - 57 V DC Output - 1 x 10/100/1000Base-T Input Port(s) - 1 x 10/100/1000Base-T Output Port(s) - 60 W - Wall/Shelf/Bench/Desktop-mountable
$263.9160 W Midspan The 60 W midspan (NPD-6001B) enables remote High Power over Ethernet (High PoE) for various Bosch IP/HD PTZ cameras. Generating a maximum of 60 W, it complies to both the IEEE 802.3af and the IEEE 802.3at standards, while doubling the available power. Rated for indoor installation only, the midspan can be installed indoors and wired to a camera installed outdoors.
Learn More
The midspan provides surge protection, optimal for installation of outdoor powered devices. The midspan has a single port and is designed to carry data and power over a standard CAT5e (or better) cable, delivered through all 4 pairs. -
Bosch PoE Injector - 120 V AC, 230 V AC Input - 60 W - White
$247.87Bosch PoE Injector - 120 V AC, 230 V AC Input - 60 W - White Learn More -
Bosch PoE Injector - 120 V AC, 230 V AC Input - 60 W
$495.75Bosch PoE Injector - 120 V AC, 230 V AC Input - 60 W Learn More -
Bosch PoE Injector - 120 V AC, 230 V AC Input - 90 W
$601.80Bosch PoE Injector - 120 V AC, 230 V AC Input - 90 W Learn More -
Bosch NPD-9501A Midspan, 95W, Single Port, AC In - 120 V AC, 230 V AC Input - 1 x RJ-45 Input Port(s) - 1 x RJ-45 Output Port(s) - 95 W
$550.0095 W Midspan
Learn More
The 95 W midspan is a high-power PoH (Power Over HDBase T) device that provides data and power between an Ethernet (remote network) switch and a MIC7000, MIC IP starlight 7000i, or MIC IP fusion 9000i camera. -
Veracity OUTBREAK VOR-OB12 Power over Ethernet Splitter - 12 V DC, 1 A Output - 1 x 10/100/1000Base-T Input Port(s) - 1 x 10/100/1000Base-T Output Port(s)
$57.91Veracity's OUTBREAK lets you upgrade network equipment such as IP cameras to be fully PoE compatible.
Simply connect OUTBREAK in line with the IP camera's network connection, and wire its DC output to the camera's power input. The camera can then connect to the network while OUTBREAK converts Power over Ethernet to the lower-voltage supply it requires.
Learn More -
Veracity POINTSOURCE PoE Injector - 48 V DC Output - 10/100Base-TX Input Port(s) - 10/100Base-TX Output Port(s)
$737.17Install, configure, focus and align IP cameras with a wireless link to your tablet or phone
POINTSOURCE Wireless is a battery powered POE injector, with a wireless network link, designed to allow simple and efficient IP camera installation with live video to smartphones, tablets and laptops.Portable POE battery pack with removable, rechargeable battery module, for site installation of IP cameras and site surveys
POINTSOURCE WIRELESS has automatic camera discovery and wireless video to your smart phone or tablet, and is ideal for powering POE IP cameras in-situ, when in-line POE is not yet available. It includes a convenient USB charging port for your phone or tablet.Battery Powered POE Injector
Veracity's POINTSOURCE Wireless is a portable, battery-powered POE injector
providing wireless network access to the IP camera it is powering. It is connected directly to the camera using a standard Ethernet network cableWireless Network Access
POINTSOURCE Wireless delivers POE to the camera and connects the IP
camera to the embedded wireless access point. By logging into the wireless network, live video can be viewed wirelessly on a smartphone, laptop or tablet.POINTSOURCE Wireless features automatic camera discovery, including ONVIF. It has a default network SSID with password and an IP address for accessing the device itself. These may be changed as required by the user. The wireless link can be switched between 2.4GHz and 5GHz. A reset function is available to reset the device to default factory settings.
The wireless LED flashes as the unit boots up and is steady when the link is available. The POE port LED shows when the camera is powered, whilst the network port LEDs indicate the wired link speed (10/100) and network activity.
Browser Connection
Upon connecting to POINTSOURCE Wireless with a wireless-network-enabled laptop, tablet or smartphone, through a browser, the user is presented with a web page, allowing configurationof thePOINTSOURCE Wireless itself and showing the IP address of the connected camera. Configuration functionality depends upon the IP camera manufacturer's supported features and functions.The system firmware is field-upgradeable to allow updates for new features and special camera types.
CAMPOINT Smart App
Learn More
Veracity provide a smart app called CAMPOINT (on iOS and Android) for IP camera configuration. This enables simple wireless viewing of video from one or more IP cameras on a smart phone or tablet. CAMPOINT runs on smart phones and tablets to make IP camera installations simple, fast and convenient to use.
