Hard Drives/Solid State Drives

SATA III 6Gb/s SSD220

Looking for the best entry-level solid state drive? This is it. Transcend's SSD220 SATA III 6Gb/s SSD boasts uncompromising transfer speeds of up to 550MB/s to accelerate system boot-up and loading times at an economic price point. By using only high-quality flash chips and enhanced firmware algorithms, Transcend's SSD220 is guaranteed to deliver greater reliability. With full support of SATA Device Sleep Mode (DevSleep), the Transcend SSD220 can prolong notebook battery life by consuming up to 90% less power.

Transcend's SSD220 is equipped with a DDR3 DRAM cache that provides an incredible 4K random read and write performance of up to 330MB/s, making it the perfect alternative as a boot disk to load your everyday computing tasks and programs in just seconds. Taking full advantage of the SATA III 6Gb/s interface and built in with SLC caching technology, the SSD220 achieves exceptional transfer speeds of up to 550MB/s read and 450MB/s write.

In addition to blazing-fast transfer speeds, the SSD220 is engineered with a RAID engine and LDPC (Low-Density Parity Check) coding, a powerful ECC algorithm, in order to keep your data secure. Built-in wear-leveling technology ensures data integrity during transmission, prolonging the lifespan of Transcend's SSD220.

With full support of SATA Device Sleep Mode (DevSleep), the SSD220 can prolong notebook battery life by intelligently shutting down the SATA interface when it is not in use. DevSleep features an ultra-low power state to conserve battery power. With a remarkable response time of less than 20 milliseconds, you can get back to work instantaneously.

To keep your Transcend SSD running fast, optimized, and error-free, Transcend's advanced SSD Scope software application is available to download and is compatible with the SSD220. Monitor your SSD's health status with S.M.A.R.T. technology, enable the TRIM command for optimum write speeds, keep your SSD's firmware up-to-date, and migrate data from your original drive to a new SSD in just a few clicks.

The SSD220 features an industry-standard 2.5" form factor. Yet, it measures just 6.8mm in height and only weighs a mere 58g, which is best suited for ultra-thin computing devices such as Ultrabooks, in addition to mainstream PCs.

Transcend's U.2 SSD UTE210T is built by the 112-layer 3D NAND flash, an 8-channel controller, and a PCIe Gen 4x4 interface, setting new benchmarks in data transfer efficiency. Its built-in DRAM cache enables fast random read and write speeds, while the anti-sulfur resistor guarantees high storage reliability in harsh conditions. The UTE210T also features superior heat dissipation, enabling high-speed operations without the risk of overheating.

The U.2 SSD UTE210T is also designed with a built-in tantalum capacitor, facilitating the Power Loss Protection (PLP) function. During unexpected power outages, the SSD guarantees data integrity and storage reliability, safeguarding important information. Transcend's UTE210T is 100% chamber tested in-house for extended operating temperatures ranging from -20? to 75?, suitable for high performance computing (HPC), data centers, big data analytics, online transaction processing (OLTP), high-resolution image streaming, and AI applications, etc.

Firmware Features

• Supports NVM command
• Dynamic thermal throttling
• Built-in LDPC ECC (Error Correction Code) functionality
• Advanced Global Wear-Leveling and Block management for reliability
• Advanced Garbage Collection
• Supports S.M.A.R.T. function to conduct health monitoring, analysis, and reporting for storage devices
• TRIM command for better performance
• NCQ command for better performance
• Full drive encryption with Advanced Encryption Standard (AES) (optional)

Hardware Features

• Compliant with RoHS 2.0 standards
• Compliant with NVM Express specification 1.4
• Compliant with PCI Express specification 4.0
• PCIe Gen 4 x4 interface
• DDR4 DRAM Cache embedded
• Endurance: 3K P/E cycles (Program/Erase cycles) guaranteed
• Anti-sulfur technology implemented to prevent sulfurization in the environment
• Power Loss Protection (PLP) to prevent data loss in the event of sudden power outage

Transcend's industrial 2.5" DRAM-less SSD SSD460K features the SATA III 6Gb/s interface and state-of-the-art 3D NAND technology, which allows 112 layers of 3D NAND flash chips to be vertically stacked. Compared to 3D NAND at 96 layers, this density breakthrough greatly improves storage efficiency. The SSD460K is fully tested in-house to guarantee reliability in mission-critical applications, boasting an endurance rating of 3K Program/Erase cycles and an extended operating temperatures ranging from -20?~75?.

Transcend also offers the SSD460K-I with wide temperature (-40? ~ 85?) capabilities to ensure sustained functionality, enhanced endurance and optimal reliability in mission-critical applications.

StoreJet® 25H3

Transcend's StoreJet 25H3 ruggedized external hard drive combines supreme shock-resistant qualities with the USB 3.1 Gen 1 interface, allowing for ultra-fast file transfers and the highest level of anti-shock protection. With up to 4TB storage capacity, the StoreJet 25H3 eliminates all fears of running out of storage.

Lightning-fast transfer speeds

The StoreJet 25H3 external hard drive is equipped with the USB 3.1 Gen 1 interface with the support of UASP (USB Attached SCSI Protocol), providing lightning-fast transfer rates of up to 5Gbps.

Excellent anti-shock protection

The StoreJet 25H3 features a three-stage shock protection system that meets US military drop-test standards to fully protect data stored on the drive. The three-stage shock protection system includes a silicone rubber case, an internal shock-absorbing suspension damper, and a reinforced hard casing.

Capacious storage

The StoreJet 25H3 comes in high capacities of up to 4TB, so you can store and back up all of your files. Take this on-the-go storage solution with you and enjoy peace of mind!

Two color options

The StoreJet 25H3 comes in navy blue and purple. Pick your favorite color!

One touch auto backup

The StoreJet 25H3 is equipped with a one touch auto-backup button that instantly backs up your data with just one press. The button also enables you to reconnect the hard drive to your PC without the need to unplug and reinsert it.

Exclusive software

Transcend Elite is advanced data management software that keeps important files organized, protected, and up-to-date.

RecoveRx is a free data recovery utility that allows you to search deep within a storage device for traces of erased files including digital photos, documents, music, and videos.

Guaranteed quality

Transcend's external hard drives are built to the highest standards and rigorously tested, offering outstanding quality, performance, and reliability. Transcend products both look after your data and complement your good taste.

Transcend's PCIe M.2 SSD MTE300S has a compact form factor and high-quality 3D NAND flash, making it easy to upgrade Ultrabooks, lightweight notebooks, tablets, and handheld gaming PCs. It is designed with multiple firmware optimization technologies, including SLC caching and LDPC ECC mechanism, which improve storage reliability and extend the drive lifespan. The MTE300S is a great choice for boosting the performance of modern work platforms.

Ready for the Best

Featuring the M.2 standard (30mm), a fast PCIe Gen3x4 interface, up to 2,000 MB/s read and 1,100MB/s write speeds, Transcend's MTE300S SSD is more advanced and efficient than a SATA SSD. The MTE300S delivers higher speeds without sacrificing power to your ultra-thin devices.

Optimized for Small, Thin Devices

At just 30mm in length, the MTE300S SSD is ideal for Ultrabooks, lightweight notebooks, tablets, and handheld gaming PCs. Thinner and lighter than normal hard drives, the MTE300S SSD gives your computer a much-needed boost while saving space!

High Productivity Anytime, Anywhere

Dedicated to maximizing system performance, the MTE300S SSD features 4K random file read and write speeds of up to 220,000 IOPS. It delivers faster loading and response times when using applications that require high graphics or heavy computing.

Transcend's M.2 SSD MTE470A is a self-encrypting drive (SED) that complies with the TCG Opal 2.0 standards. Data is protected using the hardware-based AES 256-bit encryption and LBA (Logical Block Address)sector-specific permissions.

Transcend's M.2 SSD MTE470A is built by 112 layers of 3D NAND flash and the PCI Express (PCIe) Gen 3 x4 interface, delivering never-before-seen transfer speeds. Applied with the 30µ" gold finger PCB, Corner Bond technology, and anti-sulfur resistor, the MTE470A is fortified to withstand demanding industrial applications. The MTE470A is fully tested in-house and is able to operate in extended operating temperatures ranging from -20?~75?. Its M.2 2242 form factor is compact and portable, ideal for mobile computing applications.

Firmware Features

• Supports NVM command
• Dynamic thermal throttling
• Built-in LDPC ECC (Error Correction Code) functionality
• Advanced Global Wear-Leveling and Block management for reliability
• Advanced Garbage Collection
• Early Move
• Supports S.M.A.R.T. function to conduct health monitoring, analysis, and reporting for storage devices
• TRIM command for better performance
• Full drive encryption with Advanced Encryption Standard (AES)
• Compliant with TCG Opal specifications and IEEE 1667 standards

Hardware Features

• Compliant with RoHS 2.0 standards
• Compliant with NVM Express specification 1.3
• Compliant with PCI Express specification 3.1
• Space-saving M.2 form factor (42mm) - ideal for mobile computing devices
• PCIe Gen 3 x4 interface
• Endurance: 3K P/E cycles (Program/Erase cycles) guaranteed
• Key components fortified by default with Corner Bond technology
• 30µ" PCB gold finger
• Anti-sulfur technology implemented to prevent sulfurization in the environment
• Power Shield (PS) to ensure data transfer integrity and minimize data corruption in the drive during an abnormal power outage
• Promised operational reliability in an extended temperature range (from -20°C to 75°C)
• Supports Transcend Scope Pro software

Transcend's SSD452K features the SATA III 6Gb/s interface and state-of-the-art 3D NAND technology, which allows 96 layers of 3D NAND flash chips to be vertically stacked. Compared to 3D NAND at 64 layers, this density breakthrough greatly improves storage efficiency. The SSD452K is built with DRAM cache for fast access, and is fully tested in-house to guarantee reliability in mission-critical applications, boasting an endurance rating of 3K Program/Erase cycles.

Transcend also offers the SSD452K-I with wide temperature (-40? ~ 85?) capabilities to ensure sustained functionality, enhanced endurance and optimal reliability in mission-critical applications.

Featuring the Serial ATA interface and built around a powerful controller, Transcend's SATA III 6Gb/s MSA452T2 mSATA SSD delivers blazing-fast performance. The MSA452T2 features the latest 3D NAND technology for high storage efficiency, 30µ" PCB gold finger and Corner Bond technology for enhanced durability, built-in DRAM cache for fast access, an extended operating temperature range from -20°C to 75°C, and an endurance rating of 3K Program/Erase cycles for reliable operation. The compact mSATA form factor is just one-eighth the size of a standard 2.5" SSD, making it perfect for use in space-constricted portable devices such as Ultrabooks, tablet PCs, and slim servers.

Transcend's MTS602M with SATA III 6Gb/s interface and ultra compact dimensions make it best suited to address the high-performance needs and strict size limitations of small form factor devices. This means it is perfect for use in today's modern ultrabooks, thin and light notebooks, and tablets. Built with the latest SATA III 6Gb/s specifications, and with a powerful controller and exceptional transfer speeds, the M.2 SSD easily handles everyday computing tasks as well as demanding multimedia applications.

Transcend also offers the MTS602I with wide temperature (-40? ~ 85?) capabilities to ensure sustained functionality, enhanced endurance and optimal reliability in mission-critical applications.

Technologies

• 30µ" PCB Gold Finger
• Corner Bond
• Wide Temperature
• Thermal Sensor
• Read Disturbance
• Garbage Collection
• Wear Leveling
• TRIM
• Bad Block Management
• Early Move

Firmware Features

• Built-in BCH ECC (Error Correction Code) functionality
• Advanced Global Wear-Leveling and Block management for reliability
• Advanced Garbage Collection
• Supports S.M.A.R.T. function to conduct health monitoring, analysis, and reporting for storage devices
• TRIM command for better performance
• NCQ command for better performance
• Full drive encryption with Advanced Encryption Standard (AES) (optional)
• Power-saving DevSleep (Device Sleep) mode

Hardware Features

• Compliant with RoHS 2.0 standards
• Space-saving M.2 form factor (60mm) - ideal for mobile computing devices
• DDR3 DRAM Cache embedded
• MLC NAND flash
• Key components fortified by default with Corner Bond technology
• 30µ" PCB gold finger
• Promised operational reliability in a wide temperature range (from -40°C to 85°C)
• Supports Transcend Scope Pro software