Audio & Video Consoles/Extenders

Employing NVT Phybridge's StubEQ™ technology, the NV-1642 is a 16-channel active (amplified) hub that allows the transmission of real time monochrome or color video for distances up to 2,000ft (600m2,) using Category 5 or better unshielded twisted-pair (UTP) wire. The receiver hub continuously and automatically conditions the video signal, compensating for cable attenuation, ground loops, and voltage transients, independent of video signal content.

The unparalleled interference rejection and low emissions allow long run video to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. this allows the use of shared or existing cable plant. Ground-lifting ensures no annoying "hum-bars" when ground-potential differences exist. With built-in transient protection, damaging voltage spikes are eliminated.

Learn More

Model NV-218A-PVD Video Transceiver with Power and Data is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.

This product incorporates the transceiver engine of NVT Phybridge's popular NV-214A-M video transceiver with the added value of Power and Data connections to and from the camera. Power, Video and Data are routed via UTP and RJ45 or screwless terminal block inputs/outputs. Used at the camera, the passive NV-218A-PVD has a 9" mini-coax mini lead for direct video output connection from the camera. Along side this coax lead are two sets of screwless terminal blocks for quick pass through connections for your camera's Power and Data. On the "house" or output side of the product you have the option of using convenient screwless UTP connectors or the more efficient RJ45.

The unparalleled interference rejection and low emissions of the NV-218A-PVD allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. The NV-218A-PVD carries a limited lifetime warranty and is UL and cUL listed.

Learn More

Features:

• Full-motion CCTV video at distances up to 3,000ft (1km) when used with any passive NVT transceiver; 1 mile (1,6km) when used with NV-653T transmitter
• Exceptional interference rejection
• Built-in transient protection and ground lifting
• Built-in brightness and sharpness controls; blue power LED, green active LED
• Compatible with qualified UTP cameras
• Up to ten NV-652Rs may be rack mounted using the NV-RM8/10 rack panel kit
• Best choice for DVR and high resolution applications over 750ft (225m)
• Limited lifetime warranty

The NVT Model NV-652R Video Receiver is an active (amplified) device that allows the transmission of real-time monochrome or color video on up to 1 mile (1,6km) using Category Unshielded Twisted-Pair (UTP) telephone wire.

The unparalleled interference rejection and low emissions of the Model NV-652R allow long run video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of shared or existing cable plant. Ground-lifting ensures no annoying "hum-bars" when ground potential differences exist. With built-in transient protection, damaging voltage spike problems are eliminated. The built-in sharpness and brightness controls compensate for cable loss.

Learn More

Features:

• High-Density 19" 1U high enclosure features 16 ports
• Use with any NVT passive transceiver or hub as a rack-mountable passive transceiver for full motion CCTV at distances up to 750ft (225m)
• Use with any NVT DigitalEQTM Hub or active receiver as a rack-mountable passive transmitter for distances up to 3,000ft (1km)
• Use with any NVT StubEQTM for distances up to 1,500ft (460m)
• RJ45 video connectivity with optional NV-RJ45A RJ45 to screw terminal adaptors included
• No power required
• Exceptional interference rejection
• Built-in transient protection
• Supports "up-the coax" type control signal up to 750ft (225m)
• Compatible with qualified UTP cameras
• Includes sixteen 2ft (60cm) coax jumper cables and rackmount hardware
• Limited lifetime warranty

The NVT Model NV-1613 is a 16 port passive transceiver hub that allows transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.

"Up-the-coax" type signal may be sent over the same wire pair at distances up to 750ft (225m).

The unparalleled interference rejection ability of the Model NV-1613 Hub allows video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. Perfect for larger CCTV installations where port density and camera number growth are prevalent. With built-in transient protection, damaging voltage spike problems are eliminated.

Learn More

NV-216A-PV Video Transceiver with Power is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.

NV-216A-PV video transceiver allows transmission of CCTV video and low voltage power over UTP cable. The NV-216A-PV incorporates the transceiver engine of NVT's popular NV-214A-M video transceiver with the added value of camera power connections. Power and Video are routed via UTP and RJ45 connections. Used at the camera, the passive NV-216A-PV has a compact body, a male BNC for direct connection to the camera, and is compatible with NVT's PVD™ product line. Connect the RJ45 to 4-pair cable to be routed to the NVT Phybridge cable integrator and on to an active or passive receiver hub in the MDF/Control Room.

Learn More

Features:

• Compact rack mountable 19" 1U high enclosure features 32 channels and only 1.54" (40mm) deep
• Use with any NVT passive transceiver or hub for full motion CCTV at distances up to 750ft (225m)
• Use with any NVT DigitalEQTM Hub or active receiver as a rack-mountable passive transmitter for distances up to 3,000ft (1km)
• Use with any NVT StubEQTM for distances up to 1,500ft (460m)
• RJ45 video connectivity with optional NV-RJ45A RJ45-to-screw terminal adaptors (included)
• No power required
• Exceptional interference rejection
• Built-in transient protection
• Supports "up-the coax" type control signal up to 750ft (225m)
• Compatible with qualified UTP cameras
• Limited lifetime warranty

The NVT Model NV-3213S is a compact 32-channel passive transceiver hub that allows transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.

"Up-the-coax" type signal may be sent over the same wire pair at distances up to 750ft (225m).

The unparalleled interference rejection ability of the Model NV-3213S Hub allows video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. Perfect for larger CCTV installations where port density and camera number growth are prevalent. With built-in transient protection, damaging voltage spike problems are eliminated.

Learn More

Features:

• Adaptive DigitalEQTM fully automatic 4-band equalization provides adjustment-free equalization every time
• Compact rack-mountable 19" 1U high enclosure features 16 channels with 2 outputs per channel
• Full motion CCTV video at distances up to 3,000ft (1km) when used with any passive NVT transceiver or hub; 1 mile (1,6km) when used with the NV-653T active transmitter; 1,000ft (300m) with shielded twisted-pair when used with any passive NVT transceiver or hub
• RJ45 connectivity with optional NV-RJ45A RJ45-to-screw-terminal adaptors (included)
• Exceptional interference rejection
• Built-in transient protection and ground-lifting
• Automatic compensation for reverse-polarity wiring
• At-a-glance per-channel diagnostics
• Compatible with qualified UTP cameras
• Includes sixteen 2ft (60cm) coax jumper cables, rack mount hardware and four NV-RJ45A adaptors
• Limited lifetime warranty

Employing NVT's latest generation DigitalEQTM technology, the NV-1672 is an 16-channel active (amplified) hub that allows the transmission of full-motion monochrome or color video for distances up to 1 mile (1,6km) using Category 2 or better unshielded twisted-pair (UTP) wire. The receiver hub continuously and automatically conditions the video signal, compensating for cable attenuation, wiring polarity, ground loops, and voltage transients, independent of video signal content.

The unparalleled interference rejection and low emissions allow long run video to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. this allows the use of shared or existing cable plant. Ground-lifting ensures no annoying "hum-bars" when ground-potential differences exist. With built-in transient protection, damaging voltage spikes are eliminated.

Learn More

Features:

• Extended distance camera power and video routed through UTP and RJ45
• Supports 12VDC cameras with onboard regulated power
• Use with NVT's PVD™ Power Supply Hubs and Cable Integrators
• Up to 3,000ft (1km) with a NVT DigitalEQTM Hub or active receiver, (see Power Distance Chart)
• Up to 1,500ft (460m) with a NVT StubEQTM Hub
• Frequency response DC to 10MHz (see Recommended Distance Chart)
• Up to 750ft (225m) with NVT's Passive Receiver Hubs (see Power Distance Chart)
• Exceptional interference rejection
• Built-in transient protection
• Limited lifetime warranty

The NV-226J-PV Video Transmitter +12VDC Converter is a passive (non-amplified) video transmitter combined with a 24VACto-12VDC converter. Designed to fit on the back of a fixed 12 VDC camera, this unit is architected to convert 24VAC power from the control room, while delivering real-time baseband (composite) video at extended distances, all over one 4-pair UTP cable.

The unparalleled interference rejection and low emissions of the NV-226J-PV allows video and lowvoltage power to coexist within the same 4-pair cable, using structured (EIA 568B) wiring practices. It is recommended that the 24VAC not share the same jacketed wire bundle with telecom or datacom signals.

The NV-226J-PV carries a limited lifetime warranty, is UL and cUL listed, and is CE, WEEE, and RoHs compliant.

Learn More

Features:

• Compact rack mountable 19" 1U high enclosure features 8 channels and only 1.54" (40mm) deep
• Use with any NVT passive transceiver or hub for full motion CCTV at distances up to 750ft (225m)
• Use with any NVT DigitalEQTM Hub or active receiver as a rack-mountable passive transmitter for distances up to 3,000ft (1km)
• Use with any NVT StubEQTM for distances up to 1,500ft (460m)
• RJ45 video connectivity with optional NV-RJ45A RJ45-to-screw terminal adaptors included
• No power required
• Exceptional interference rejection
• Built-in transient protection
• Supports "up-the coax" type control signal up to 750ft (225m)
• Compatible with qualified UTP cameras
• Limited lifetime warranty

The NVT Model NV-813S is a compact 8-channel passive transceiver hub that allows transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.

"Up-the-coax" type signal may be sent over the same wire pair at distances up to 750ft (225m).
The unparalleled interference rejection ability of the Model NV-813S Hub allows video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. Perfect for larger CCTV installations where port density and camera number growth are prevalent. With built-in transient protection, damaging voltage spike problems are eliminated.

Learn More