Network & Communication Information Technology

iConverter 10/100 Ethernet Fiber Media Converter RJ45 SC Single-Mode 30km Module - 1 x 10/100BASE-TX; 1 x 100BASE-LX; Internal Module; Lifetime Warranty

$657.56

The iConverter 10/100 manageable media converter is a member of the modular iConverter product family. It provides UTP to Fiber conversion as well as rate conversion between 10BASE-T or 100BASE-Tx and 100BASE-Fx fiber. The 10/100 features user-selectable Link Propagate, Link Segment and Remote Fault Detection modes to facilitate quick fault detection, isolation and reporting.

UTP port with 10/100 automatically supports Half or Full-Duplex auto-negotiation with a manual crossover switch
User-selectable link fault detection modes facilitate quick fault detection, isolation and reporting
Management is available with the addition of a management module to the chassis
Modules are hot-swappable in 19-Module, 5-Module, 2-Module or 1-Module chassis
Wide Temperature models available with temperature range of -40 to +60" C
Lifetime Warranty and free 24/7 Technical Support

Learn More

| Add to Compare

miConverter 1000Mbps Gigabit Ethernet Fiber Media Converter RJ45 ST Single-Mode 12km - 1 x 1000BASE-T, 1 x 1000BASE-LX, No Power Adapter, Lifetime Warranty

$372.30

The miConverter Gx is a miniature 1000BASE-T UTP copper to 1000BASE-X fiber Gigabit Ethernet media converter. The miConverter Gx provides cost-effective fiber connectivity from Gigabit switches to diagnostic equipment, desktop and laptop computers.

The miConverter Gx is the first Gigabit media converter powered by a USB port (1.0, 1.1, and 2.0). An optional USB Power Adaptor Cable is available, which reduces the module's weight and eliminates the need to tether the miConverter Gx to an electrical outlet.

Miniature Gigabit Ethernet media converter
Supports 1000BASE-T, 1000BASE-X and the IEEE 802.3 specification
Plug-and-Play capability
USB power via optional Power Adapter Cable
Supports Full/Half-Duplex fiber optic auto-negotiation
Multimode and single-mode fiber options
LED indicators for UTP and fiber status
Domestic, Universal and Country/Region specific power supply options
Wall-mount with optional mounting brackets or included Velcro® strips
Small and lightweight, only 5 ounces (without power supply)
Cost-effective
Lifetime Warranty and free 24/7 Technical Support

Learn More

| Add to Compare

FlexPoint 100Mbps Ethernet Fiber to Fiber Media Converter SC Multimode 5km to Single-Mode 60km - 1 x 100BASE-FX; 1 x 100BASE-LX; US AC Powered; Lifetime Warranty

$350.74

The FlexPoint 100FF is a protocol-transparent fiber converter that provides reliable and cost-effective extension of network distances by connecting multimode fiber networks or devices over single-mode fiber cabling.

The FlexPoint 100FF is designed to operate with a constant rate signal between 1Mbps to 100Mbps allowing the converter to be used in Ethernet networks as well as other fiber-to-fiber protocol applications.

No manual configuration is required with the plug-and-play FlexPoint 100FF. Connect the fiber cables to the appropriate interface and the installation is complete.

The FlexPoint 100FF features descriptions of the LED indicators on the label for easy in-the-field installation and maintenance. The LEDs report the availability of power and the detection of devices attached to the fiber ports.

FlexPoint modules can be mounted utilizing optional wall-mounting hardware or with DIN-rail mounting brackets. They can also be rack-mounted in a 5-Module shelf or in a high-density 14-Module, power-redundant Powered Chassis.

Learn More

| Add to Compare

Omnitron Systems iConverter 8903N-1 Network Media Converter - 1 x Network (RJ-45) - 1 x SC Ports - 10/100Base-TX, 100Base-FX - 30 km - Internal

$846.80

The iConverter 10/100M2 conforms to the Ethernet in the First Mile (EFM) fiber standards to support Fiber-to-the-X Metropolitan and Enterprise LAN networks. The 10/100M2 provides intelligent, securely managed service demarcation at the customer premises, offering Layer 2 Control Protocol (L2CP) policy control, Quality of Service and enhanced Bandwidth Control (rate-limiting) capabilities. The 10/100M2 features built-in Operations, Administration and Maintenance (OAM) with comprehensive performance monitoring, fault detection and provisioning.

Learn More

| Add to Compare

iConverter T1/E1 Single-Fiber Media Converter RJ48 SC Single-mode 40km BiDi Module Wide Temp - 1 x T1/E1; 1 x SC Single-mode Single-Fiber (1310/1550); Internal Module; Lifetime Warranty

$2,426.74

iConverter T1/E1 Single-Fiber Media Converter RJ48 SC Single-mode 40km BiDi Module Wide Temp - 1 x T1/E1; 1 x SC Single-mode Single-Fiber (1310/1550); Internal Module; Lifetime Warranty Learn More

| Add to Compare

Omnitron Systems OmniConverter Managed Gigabit, MM ST, RJ-45, Ethernet Fiber Switch - 4 x 10/100/1000BASE-T, 1 x 1000BASE-X, DC Power, 5 Year Warranty

$1,524.73

The OmniConverter G/M is a compact managed Ethernet gigabit fiber edge switch that features one or two Gigabit fiber ports and four or eight 10/100/1000 RJ-45 copper ports. The OmniConverter G/M enables network distance extension with fiber cabling.

The OmniConverter G/M is a standard Layer 2 Ethernet switch that forwards frames to any port based on their MAC address.

The OmniConverter G/M supports Directed Switch mode, which directs multicast traffic (such as video) only to the appropriate fiber port, preventing the multicast video traffic from flooding other network ports.

Models with two fiber ports support redundant fiber uplinks for critical applications that require protection and sub 50ms restoration in the event of a fiber failure. The second fiber port may also be used to daisy-chain multiple Ethernet switches, or it may be used as another switch port.

Models with two fiber ports also support Dual Device mode that enables the G/M to operate as two independent and isolated Ethernet switches. In Dual Device mode, the G/M provides separate and independent data traffic paths between the two fiber links and four or eight RJ-45 ports.

The G/M modes of operation can be configured using easily accessible DIP-switches or using Web, Telnet, SSH or Serial Console management interfaces. The G/M supports in-band and out-of-band management. In-band management is provided by accessing the module through any of the Ethernet RJ-45 or fiber ports and supports IP-based web, Telnet, SSH and SNMPv1/v2c management interfaces. Out-of-band management is provided by accessing the serial console port. Omnitron's NetOutlook SMNP software can be used for real-time alarm reporting and monitoring of each port.

The OmniConverter G/M is available with fixed ST, SC, and LC connectors or Small Form Pluggable (SFP) transceiver receptacles. Fiber ports support multimode or single-mode and dual fiber or single-fiber with distances up to 140 km. SFP models support a variety of distances in standard and CWDM wavelengths.

The compact OmniConverter Ethernet switches can be wall mounted or DIN-rail mounted using an optional DIN-rail mounting clip. They are available with 2- Pin DC Terminal and AC to DC 100 - 240VAC power adapters.

Learn More

| Add to Compare

Omnitron Systems OmniConverter Unmanaged Gigabit PoE+, SFP, RJ-45, Ethernet Fiber Switch - 8 x 10/100/1000BASE-T, 1 x 1000BASE-X, DC Power, 5 Year Warranty

$1,771.87

The OmniConverter GPoE+/Sx is a compact unmanaged PoE and PoE+ Ethernet fiber switch that features one or two Gigabit fiber ports and four or eight 10/100/1000 RJ-45 copper Power Sourcing Power-over-Ethernet ports. The OmniConverter switch enables network distance extension with fiber cabling and provides PoE+ power to all RJ-45 ports.

The GPoE+/Sx functions can be configured using easily accessible DIP-switches.

The OmniConverter GPoE+/Sx is a standard Layer 2 Ethernet switch that forwards frames to any port based on their MAC address.

The 4-Port GPoE+/Sx supports MUX Mode, which allows the data traffic to be tunneled between two GPoE+/Sx switches. Data traffic on the RJ-45 ports on one switch are mirrored to the corresponding RJ-45 ports on the other switch.

The GPoE+/Sx supports Directed Switch mode, which directs multicast traffic (such as video) only to the appropriate fiber port, preventing the multicast video traffic from flooding other network ports.

Models with two fiber ports support redundant fiber uplinks for critical applications that require protection and sub 50ms restoration in the event of a fiber failure. The second fiber port may also be used to daisy-chain multiple Ethernet switches, or it may be used as another switch port.

Models with two fiber ports also support Dual Device mode that enables the GPoE+/Sx to operate as two independent and isolated Ethernet switches. In Dual Device mode, the GPoE+/Sx provides separate and independent data traffic paths between the two fiber links and four or eight RJ-45 ports.

The OmniConverter GPoE+/Sx is available with fixed ST, SC, and LC connectors or Small Form Pluggable (SFP) transceiver receptacles. Fiber ports support multimode or single-mode and dual fiber or single-fiber with distances up to 140 km. SFP models support a variety of distances in standard and CWDM wavelengths. The 4 Port RJ-45 models support 1000BASE-X and 100BASE-X SFP fiber transceivers.

The GPoE+/Sx automatically negotiates and delivers the power level required by its Powered Device (PD) partner. When negotiating to PoE (IEEE 802.3af) it delivers up to 15.4 Watts per RJ-45 port. When negotiating to PoE+ (IEEE 802.3at) it delivers up to 30 Watts per RJ-45 port.

PoE power reset enables a PD to be re-initialized remotely. When a problem with a PD is identified, the fiber port on a managed switch can be shut down or disconnected, enabling the PoE power reset function on the OmniConverter. The PoE power to the PD is disabled for 2 seconds when a loss of receive fiber link is detected by the OmniConverter, eliminating the need for costly truck rolls to remote PD sites.

The compact OmniConverter switches can be wall mounted or DIN-rail mounted using an optional DIN-rail mounting clip. The OmniConverter switches are available with DC input power via terminal connectors or external 100 to 240V AC power adapters. The 8-Port models are available with 100 to 240V AC power adapters.

Learn More

| Add to Compare

Omnitron Systems OmniConverter GHPoEBT/M Transceiver/Media Converter - Network (RJ-45) - 4 x 60W PoE (RJ-45) Ports - 1 x ST Ports - Multi-mode - 0 mil Fiber - Gigabit Ethernet - 1000Base-T, 1000Base-X - 0.55 km - AC - Standalone, Wall Mountable - TAA Comp

$1,840.34

Omnitron Systems OmniConverter GHPoEBT/M Transceiver/Media Converter - Network (RJ-45) - 4 x 60W PoE (RJ-45) Ports - 1 x ST Ports - Multi-mode - 0 mil Fiber - Gigabit Ethernet - 1000Base-T, 1000Base-X - 0.55 km - AC - Standalone, Wall Mountable - TAA Compliant Learn More

| Add to Compare

Omnitron Systems iConverter 4Tx VT Fast Ethernet Managed Switching Module - 4 x 10/100Base-TX

$425.50

The iConverter 4Tx VT 10/100 managed Ethernet switch module is a member of the iConverter product family. It provides a compact 4-Port 10/100 Ethernet switch that is expandable across the iConverter 19-Module, 5-Module and 2-Module chassis backplanes, as well as being supported as a stand-alone switch with the iConverter 1-Module Chassis.

The iConverter 4Tx VT supports the IEEE 802.1Q and 802.1p standards. It supports the 802.1Q VLAN packet tagging and untagging for segregating data in Enterprise networks, and enabling secure separation of Service Provider network management and customer data to improve security and intrusion protection.

Learn More

| Add to Compare

miConverter 10/100/1000 Gigabit Ethernet Fiber Media Converter RJ45 ST Multimode 550m - 1 x 10/100/1000BASE-T; 1 x 1000BASE-SX; USB Powered; Lifetime Warranty

$542.41

miConverter 10/100/1000 Gigabit Ethernet Fiber Media Converter RJ45 ST Multimode 550m - 1 x 10/100/1000BASE-T; 1 x 1000BASE-SX; USB Powered; Lifetime Warranty Learn More

| Add to Compare