SCSI/RAID Controllers

An innovation in design and concept, user configurable SATA connectors. 2 SATA channels can be set as Internal, External or combination with few jumpers.

It integrates six independent SATA channels, and a micro-processor. With proper setting the chip can be configured as a 1 to 5-ports SATA II Port Multiplier, or a 5 to 1-port SATA II Port Selector. Based on JMB321 single chip. JMB321 contains 15 GPIOs which can be configured as various standard interfaces. It also has the capability to load external firmware code to extend its functionality.

The SI-PEX40156 4 port SATA III PCI-e 3.0 x1 controller card ASMedia 1064 chipset adds four SATA III ports to a computer through a PCI-e 3.0 x1 slot, delivering multiple internal 6Gbps connections for SATA III hard drives and SSDs. With full support for SATA 3.0 hard drives and data transfer speeds of up to 6 Gaps, the controller card features a native PCI Express single chipset that provides enhanced compatibility, reliability and performance for SATA 600 MB/s storage needs.

The SY-PEX40167 adds 10 SATA 6G ports through a PCIe 3.0 x1 card to your PC System. It's an ideal solution for surveillance users to install up to 10 SATA drives and/or ODD drives in one low profile PCIe card without driver installation required.

Using the JMB585 chipset, the SI-ADA40141 can provide M.2 (PCIe Gen3 x2 bandwidth) to 5 Port SATA 6Gb / s card solution. For the storage solution based on data transfer of multiple hard drives, the newly added FIS-based switching design can overcome the bottlenecks created by operating multiple SATA storage devices simultaneously. The data transmission rate of the JMB585 can achieve to 1700MB/s, which is the maximum transfer speed of PCIe Gen3 x2.

Advanced to SATAIII 6Gb/s technology with this controller. Add up to 16 drives to your system to expand your current storage capacity. This card is ideal for creating your own servers and workstations needing high-speed data transfer.

Brings new life to any old desktop PC. Connects up to 4 SATA II high speed SATA hard disk drives. Supports Windows 8 and Server 2012

Supports 8 port 6Gb/s SATA III interface,Supports Port Multiplier,Supports Hot-Plug,Supports drive power control and staggered spin-up.Supports SATA Partial / Slumber power management state.

ASM1064, a SATA host controller(AHCI) with upstream PCIe Gen3 x1 and downstream four SATA Gen3 ports. It's a low latency, low cost and low power AHCI controller. With four SATA ports and cascaded port multipliers, ASM1064 can enable users to build up various high speed IO systems, including server, high capacity system storage or surveillance platforms.

A PCI-e version 2.0, x2 slot card from IOCREST, uses the newest Marvell 88SE9230 Chipset single chip 4-port Gen III 6Gb/s host controller. Each PCI-Express 2.0 lane provides up to 500Mb/s of throughput.