SCSI/RAID Controllers

This card enables Serial ATA PHY up to 6.0Gbps high speed interface utilizing a native Mini PCI-Express 2.0 interface.

This half size 2 port Mini PCI-Express to SATA III Controller Cards allows you to add 2 SATAIII connections to a small form factor system. This is a great way to upgrade or expand the capabilities of your current system. This controllers is compatible with Serial ATA devices. This controller can utilize built in RAID support for RAID 0, 1, & Span.

Using the JMB585 chipset, the SI-PEX40139 can provide extra 5 Port SATA III to any free PCI-e x4 slot with PCIe Gen3 x2 bandwidth. For the storage solution based on data transfer of multiple hard drives, the newly added FIS-based switching design can overcome the bottlenecks created by operating multiple SATA storage devices simultaneously. The data transmission rate of the JMB585 can achieve to 1700MB/s, which is the maximum transfer speed of PCIe Gen3 x2.

The SY-PEX40166 adds 6 SATA 6G ports through a PCIe 3.0 x1 card to your PC System. It's an ideal solution for surveillance users to install up to 10 SATA drives and/or ODD drives in one low profile PCIe card without driver installation required.

Supports 16 port 6Gb/s SATA III interface,Supports Port Multiplier,Supports Hot-Plug,Supports drive power control and staggered spin-up.Supports SATA Partial / Slumber power management state.

ASM1064, a SATA host controller(AHCI) with upstream PCIe Gen3 x1 and downstream four SATA Gen3 ports. It's a low latency, low cost and low power AHCI controller. With four SATA ports and cascaded port multipliers, ASM1064 can enable users to build up various high speed IO systems, including server, high capacity system storage or surveillance platforms.

ASMedia PCIe product ASM2806, a low latency, low cost and low power 6 lane , maximum 4 downstream ports packet switch. With upstream PCIe Gen3x2 bandwidth,

IOCREST newest card with advance Marvell 88SE9215 Chipset single chip 4-port Gen III 6Gb/s host controller.

The SY-PEX40169 adds 24 SATA 6G ports through a PCIe 3.0 x4 card to your PC System. It's an ideal solution for surveillance users to install up to 24 SATA drives and/or ODD drives in one low profile PCIe card without driver installation required.

An innovation in design and concept, user configurable SATA connectors. 2 SATA channels can be set as Internal, External or combination with few jumpers.

It integrates six independent SATA channels, and a micro-processor. With proper setting the chip can be configured as a 1 to 5-ports SATA II Port Multiplier, or a 5 to 1-port SATA II Port Selector. Based on JMB321 single chip. JMB321 contains 15 GPIOs which can be configured as various standard interfaces. It also has the capability to load external firmware code to extend its functionality.